Most Recent Update

  • Reamer Regrinding - In the near future I'll need to make a bunch of things with tight-tolerance 22 mm bores, so instead of buying a 22 mm reamer, or just boring the holes like...
    3 days ago

September 4, 2013

Rotating Climbing Wall

For REX this year at East Campus, I helped to design and build a rotating climbing wall.

The climbing wall consisted of a twelve-foot diameter by eight-foot wide wooden cylinder suspended on an axle.  The surface of the cylinder was covered in climbing holds.  As the climber progresses, their weight causes the cylinder to rotate opposite the climbing direction.